
Freephone: 0800 0121679
Updated: 26th February 2009
![]()
The information about these products comes direct from the Aqua Medic Web Site. Unfortunately they were written by someone with little knowledge of English. I have tried to correct what I can, but some may be missed or left alone. Where the information box just contains the product name it is because I could find no info on that subject. (as yet!).

The Tridacna 200 panoramic aquarium is a ready to use aquarium system with cabinet, filter system and lighting. Aquarium: 15 mm (c. 0.6") float glass. Central overflow chamber with overflow comb and trickle plates, filled with Bactoballs. Solid timber trim. Water height 70 cm (c. 28"). Dimensions including frame: 200 x 73.5 x 87 cm (c. 80" x 29.4" x 34.8"). Cabinet: Fully assembled in beech, custom colours are also available. Filter system: Reef 2000 complete with 2 Ocean Runner 3500 circulation pumps and pipework. Lighting system: An aquaspacelight in either black, white or silver with 3 x 250 w aqualine 10000 13000 K metal halide lamps and 4 x 24 w L67 blue Dulux power compact lamps. Over all dimensions (lxwxh): 203.5 x 73.5 x 169 cm (c. 81.4" x 29.4" x 67.6").
Percula 90
Integrated seawater aquarium system with internal filtration, lights and a cabinet. The Percula 90 is a complete ready to use system.
The components are:
aquarium 36 x 24 x 20 inch ( 90 x 60 x 50 cm) glued with black silicone
cabinet made of wood
filtration system with protein skimmer, trickle filter with circulation pump 1.000 l/hr (250 gph) and 2 mechanical filters 1.000 l/hr (250 gph) each.
illumination using an aquastarlight with aqualine 1 x 150 w aqualine 10000K metal halide bulbs and steel wire support.
Integrated seawater aquarium system with internal filtration, lights and a cabinet
The Percula 120is a complete ready to use system.
The components are:
aquarium 48 x 24 x 26 inch (120 x 60 x 65 cm) glued with black silicone,
cabinet made of wood
filtration system with protein skimmer, trickle filter with circulation pump 1.000 l/hr (250 gph) and 2 mechanical filters 1.000 l/hr (250 gph) each.
illumination using an aquastarlight with aqualine 2 x 150 w aqualine10000K metal halide bulbs and steel wire support.
Available in black or russet burr elm laminate.

The Turboflotor 1000 is a compact skimmer with an integrated trickle filter, designed for installation in a sump. The skimmer includes venturi pump with needle wheel to mix air with water and pushes both into the reaction pipe (110 mm, 4.4 inches in diameter). The skimmer´s design ensures an intensive air-water mix giving a long contact time for the air bubbles. The bubbles create foam that is collected in the conical foam cup. Treated water from the reaction cylinder is fed to the attached Bactoball filled trickle filter, which is used for biological filtration. Height: 59 cm, c. 24" Total width: 37 x 15 cm, c. 15" x 7"

Aquaniveau
The aquaniveau
electronic level controller may be used in 2 different modes:
As a top up controller with one or two float switches, which is used to
control the replacement of evaporated water. One switch controls the
pumping from a storage vessel (not supplied), the other, if opted for,
provides protection to prevent the top up pump (not supplied) from running
dry. As refill pump, we recommend the peristaltic pump SP 3000.
As maximum / minimum contact to control reverse osmosis units, in
conjunction with a solenoid valve. Both level switches are low
voltage.
mv Computer
Microprocessor controlled Redox-potential (ORP) Monitor and Controller
The Aqua Medic mV Computer uses the same microprocessor technique as the pH Computer. Water proofed finger-touch keys are used to set the needed values and calibrate the electrode The mV Computer is ideally suited to control the anaerobic biological filters (i.e. Aqua Medic Nitratereductor) with negative redox potential. It is also used to control the supply of ozone to the aquarium or monitor the aquarium water’s redox- potential. All of these functions are possible due to the computer’s broad measuring and controlling range of minus 500 to plus 1000 mV. A plastic shaft mV electrode with a BNC fitting and calibration fluids are included.
Ocean Runner
3000
Circulation pump
The Ocean Runner OR3000 is a powerful universal pump to be used as a circulation or current pump, both in saltwater and freshwater aquaria. The OR3000 is supplied with a rugged pump housing, an energy saving motor, a polished ceramic shaft and ceramic bearings. All these qualities ensure a quiet and maintenance free performance for many years. Technical data: Power consumption 65 watt, Capacity 2.800 l/h (700 Gallons) Pump height 3,2 m (9.6 ft)
The plankton light reactor
is a simple system for the production of plankton in a natural food chain.
In the plankton light reactor, microalgae are produced with light,
fertiliser and CO2. The microalgae can be fed directly to many
filter-feeding invertebrates, and especially to zooplankton. The growth
rate of the microalgae in the plankton light reactor is enormous.
If the supply of light, CO2 and nutrients is continuous, the bio-mass of
the algae may increase four-fold within 24 hours. Fresh and salt water
species of phytoplankton can be cultivated. Contents: plankton light
reactor, approx 2.5 l (c. 0.65 gal) volume, wall bracket air pump
connections, lighting unit with fluorescent lamp (18 W), special reflector
and fixing clamps.
Diameter: 80 mm(c. 3.2")
Length: 80 cm, (c. 32")
Hose connection: 6 mm(c. ¼")

The thermoelectric Minicooler completes the line of the Aqua Medic Titan coolers at the lower end. It is designed for aquariums up to 150 l volume, especially to prevent overheating in coral reef aquariums. The cooler uses the thermoelectric method with peltier elements. This methos is only economic for low capacities. Electric current is directly converted into heating or cooling. No compressor is used, no environmentally unsafe cooling oil. The unit can be switched from cooling to heating, by simply changing the poles of the DC current. The peltier elements are operated with 24V D.C. The transformer is already included in the housing, so the cooler can be directly connected to the mains. (230V or 110V, watch the label). The cooler can be used for seawater and freshwater. The heat exchenger is made of teflon coated stainless steel and corrosion free. The unit is supplied with a digital temperature controller, the set value can be programmed very easy. It can be changed from cooling to heating by pressing one button only.
Nitrate reductor 5000
Denitrifikationfilter for
aquaria up to 3.000 Liter (800 Gallons)
The Nitrate reductor 5.000 uses the same biological principle as the smaller Nitrate reductor. It has a volume of 30 l and is supplied with an internal circulation and a connection for a redox probe ( with standard thread). The feeding of the bacteria is performed manually with Denimar of automatically using Deniballs. The filter is a closed system and is supplied with water via a bypass of 12 - 30 Liter/hr ( 3 - 8 gph).

The Biostar is a complete biological and mechanical filter system
for aquariums up to 250 l (c. 65 gal) volume and is easily mounted as a
hang on filter (4 cm, c. 1.6" capacity) outside the aquarium. Its
principal component is the Biorotor, a rotating sponge wheel. This wheel
is only partly immersed and as a result, the bacteria living on the sponge
are alternately immersed and submersed. This encourages a high oxygen
uptake and the filter becomes a powerful reducer of biological waste -
volume to volume far more efficient than conventional trickle filters. The Biostar is equipped with a pre filter sponge for mechanical
filtration and a circulation pump with a capacity of 1000 l/h (c. 250 gph).
Dimensions (l x w x h): 8 x 25 x 23 cm
(c. 3.2" x 10" x 9.2")
A
cultivation unit which provides for the simple and easy hatching of
artemia cysts. The unit is installed inside the aquarium, where it uses
the warmth of the aquarium water to assist the hatching process. Capacity:
400,000 cysts per hatch.
Contents: aqua breed reactor, 7g (c. 0.25 oz) artemia salt,10ml (c. 0.3
oz) life-A (decapsulated artemia eggs).
Diameter: 60 mm (c. 2.4")
Length: 20 cm (c. 8")
Hose connection: 6 mm (c. ¼")

A
cultivation unit for hatching larger quantities of artemia cysts. The unit
can be installed inside or outside the aquarium: the hatching rate will
depend on the ambient temperature. Capacity: 2,000,000 cysts per hatch.
The unit may also be used for growing on adult artemia; after
approximately 2 weeks the animals are fully grown and can be used as
food.
Contents: aqua breed - 1000 reactor - approx. volume 1 litre (c. 33.8 oz),
support plate
Diameter: 80 mm (c. 3.24")
Length: 45 cm(c. 18")
Hose connection: 6 mm(c. ¼")

The regular unit is chrome plated and offers:
- a fixed working pressure of 1.5 bar
- a needle valve for fine adjustment
- two pressure gauges to show both the cylinder and working pressures
The regular fits industry standard CO2 cylinders having an external
valve.
![]()
In
1988 the aquasunlight aquarium lighting system set a new benchmark.
It was the first time that a single lighting system met all the
requirements of the professionals. Even today, nothing matches these
standards. The lighting system with its well-known operation, safety and
functionality, as well as the already 'classic' design, is still regarded
as the "dot on the i " for a professional aquarium.
The technical specification of the classic and future models is identical:
Both luminaires are available with lamps for fresh or saltwater as twin
lamp models. Standard colours are black or white, custom colours from the
RAL range are also available.
Metal halide lamps:
The salt water version of the luminaires are equipped with aqualine
10000 13000°K lamps, the freshwater version with the aqualine 5000
daylight lamp. The units are fitted with a patented lamp holder giving
positional adjustment from the outside.
Fluorescent tubes:
The saltwater version is supplied with blue fluorescent tubes, the
freshwater version with Gro-Lux tubes (2 x 30 watts)
Moonlight:
Long life 15 watt blue lamp. It creates a dim light enabling observation
of the aquarium during the night, and enables fish to orientate themselves
in the dark aquarium and prevents light shock to sensitive animals.
Control:
The basic equipment of the aquasunlight does not include any
control device. The 3 output channels can be controlled with standard
timers. As an option, the luminaires can be supplied with a Light
Computer (aquasunlight classic and future plus). With
this computer, the two main channels (metal halide and fluorescent lamps)
and the moonlight can be precisely controlled: the moonlight intensity
varies according to the diurnal cycle of the moon - a perfect simulation.
Reflectors:
The units are equipped with high quality, wide beam reflectors. The whole
underside of the unit is covered with reflector plates, ensuring a
sparkling lighting effect in the aquarium.
Dimensions: 120 x 40 x 8 cm (c. 48" x 16" x 3.2")

amazon is a fresh water conditioner containing blackwater
concentrate - peat extract, with supplementary beneficial humic and tannic
acids. Additionally the formulation has a water conditioner for binding
heavy metals and neutralizing fresh tap water. amazon adjusts your
aquarium water to create a more natural environment with the authentic
brown hue simulating the conditions in tropical waters, and encouraging
natural behavior in the fish.
100 ml for 200 litres (c. 3.3 oz for 50 gallons)
250 ml for 500 litres (c. 8.4 oz for 125 gallons)
500 ml for 1,000 litres (c. 17 oz for 250 gallons)
5 litres for 10,000 litres (c. 1.3 gal for 2,500 gallons)

spureal supplements the low mineral content of aquarium water with
essential trace elements. Its special formulation ensures spureal
is totally absorbed in the water, eliminating these deficiencies. The long
term health of the animals is also enhanced as spureal contains
water conditioning compounds that protect the skin of the fish, improve
regeneration of the mucous membrane after injury, and prevent the attack
of parasites.
100 ml for 1,000 litres (c. 3.3 oz for 250 gallons)
250 ml for 2,500 litres (c. 8.4 oz for 625 gallons)
500 ml for 5,000 litres (c. 17 oz for 1,250 gallons)
5 litres for 50,000 litres (c. 1.3 gal for 12,500 gallons

biovit is a multi-vitamin compound for use in fresh and salt water
aquaria. Its formulation is suited to both fish and invertebrates. Regular
use enhances growth, strengthens the immune system and increases the
willingness to spawn. biovit contains vitamins B1, B6, B12, E and
other essential elements. biovit may be added directly into the
aquarium water, or to the food prior to feeding.
100 ml (c. 3.4 oz)

floreal is the essential supplement to ferreal. It counters
the symptoms created by mineral deficiency in the plants, and provides
them with iodine and fluoride which give a visible boost to plant growth.
In addition, floreal contains many other essential minerals such as
potassium, magnesium and iron and numerous required organic substances.
100 ml for 200 litres (c. 3.3 oz for 50 gallons)
250 ml for 500 litres (c. 8.4 oz for 125 gallons)
500 ml for 1,000 litres (c. 17 oz for 250 gallons)
5 litres for 10,000 litres (c. 1.3 gal for 2,500 gallons)
Reef Life
Calcium
Provides calcium to
the reef aquarium in an easily metabolized form.
Reef Life Calcium adds calcium and trace
elements in a natural combination. It is a three component set containing
a calcium solution, buffer tablets and a trace element solution. Used
together, you can control the level of dissolved calcium in the aquarium,
stabilize the carbonate hardness and supplement the depleted trace
elements. There will be no alteration of the pH, the ion equilibrium will
be maintained, which results in a healthy coral growth. Each pack will
produce 50 g of pure Calcium and 2.300-mmol alkalinity. Reef Life Calcium
consists of three components:
250 ml concentrated calcium solution
250 buffer tablets with bicarbonate
250-ml trace element solution including the minerals required maintaining
the ion equilibrium.
Reef Life
Trace
Trace element additive for reef aquaria
Trace elements are essential for all animals.
Minute quantities of almost all the elements known on the earth are
dissolved in seawater. In the aquarium these elements, essential to the
well being of the inhabitants, may become depleted. It can be compensated
by adding REEF LIFE TRACE at regular intervals. It provides elements such
as boron, chromium, copper, fluoride, iron, manganese, molybdenum, zinc
and many more. It does not use jelling agents, which have been shown to
harm coral growth. 250 ml (8.4 oz) REEF LIFE TRACE treat a 400 l (100 gal)
aquarium for one to three months.

terralit is a slow release fertilizing medium providing optimal
nutrient supply for aquatic plants via the aquarium substrate. terralit
is based on natural zeolite and is loaded with nutrients by a special
manufacturing process. These nutrients can only be assimilated by the
plant's roots, making over fertilization impossible. terralit also bonds
and re-releases water borne nutrients, promoting rapid growth of the
plants.
1 kg for 100 litres (c. 2.2 lbs for 25 gallons)
2 kg for 200 litres (c. 4.4 lbs for 50 gallons)
5 kg for 500 litres (c. 11 lbs for 125 gallons)
The bubble counter is a simple and safe unit for monitoring the dosage of CO2 gas into aquaria. It should be installed in the low pressure part of the gas delivery circuit. An integrated non return valve prevents water flow back and a robust holding plate enables easy fixing to the outside of the aquarium.

Natural water movement is essential for the modern reef aquarium. The Aqua Medic Wave is a microprocessor based controller that can operate up to three circulation pump circuits and one filter pump circuit, to simulate natural surge and wave effects. The Wave can activate the pumps in 8 different programs to simulate many different current patterns. Between zero and three pumps operate at any one time. The activation frequency can be adjusted. The fourth channel (filter pump) runs continuously but when feeding the aquarium's inhabitants, especially invertebrates with planktonic food, a feeding pause button can be activated which stops all the pumps, including the filter pump, for approximately 10 minutes. An integrated light sensor ensures that during darkness no more than one circulation pump is active at any time. Each channel can be used for Ocean Runner pumps or powerheads up to a loading of 100 watts.
The 5000 series protein skimmers have been developed for larger aquaria. Just like the smaller models, they feature venturi pumps (Ocean Runner 3500) which include a patented needle wheel for optimal mixing of the air and water. The reaction cylinder has a diameter of 200 mm (c. 8 inches). Above the cylinder, the patented conical foam cup improves the production of foam. The inlets and outlets of the skimmer are designed to ensure an extensive contact time for the air bubbles within the counter-current. To supply the skimmer with water, a separate pump with a capacity of 2000 - 4000 litres per hour (500 - 1000 gph), e.g. Ocean Runner 3500, is needed.

The Turboflotor 1000 is a compact skimmer with an integrated trickle filter, designed for installation in a sump. The skimmer includes venturi pump with needle wheel to mix air with water and pushes both into the reaction pipe (110 mm, 4.4 inches in diameter). The skimmer´s design ensures an intensive air-water mix giving a long contact time for the air bubbles. The bubbles create foam that is collected in the conical foam cup. Treated water from the reaction cylinder is fed to the attached Bactoball filled trickle filter, which is used for biological filtration.

The Aqua Medic pH Computer has the most modern microprocessor installed. This fulfills the high demands for accuracy when measuring and controlling the needed values. Water proofed finger-touch keys are used to set the needed values and calibrate the electrode. The pH Computer is used to control the exact values of pH in the aquarium or Aqua Medic Calcium Reaktor. The controlling accuracy if fixed at 0,05 pH. The computer can switch up to 500 watts using the supplied external electrical socket. When the calibration key has been selected the unit will automatically calibrate itself with the electrode. A plastic shaft pH electrode with BNC fitting and the correct calibration fluids are included.

The Aqua Medic Light Computer is designed to closely simulates nature's illumination for the aquarium. It is supplied with three separate programmable channels. Channel one controls the primary lamp (e.g. metal halide, maximum 750 Watt). Channel two controls the additional light (e.g. blue fluorescent, maximum 300-Watt). The third channel, the specialty of the computer, controls a night light with a maximum of 100 watt. The night-light’s intensity is controlled using an internal program to simulate the natural 29-day moon cycle. These three channels therefore simulate the cycle dusk to dawn. This cycle is of major importance for many plants and animals in setting a rhythm in their reproduction cycle.

The new Titanium chiller line is founded on our successful SK cooler line which is proofed since more than 12 years. The heat exchangers of the Titan line are manufactured from pure sea water proof titanium. The coolers are suitable for all applications in freshwater or seawater aquariums. A further feature of the Titan coolers is the low noise level. The Titan 250, the smallest unit of the line produces only 20 db and is less noisy, than an orinary kitchen refrigerator. In addition, the prices dropped into very reasonable regions. So, the corals can keep cool next summer. The line of our Titanium chillers includes now 4 models. From the small aquarium (100 - 250l) up to larger systems up to 2500 l, the temperatures can be kept safely in the range of 24 - 27°C. A digital temperature controller takes care, that the adjusted temperature is kept safely. As our other cooling units, the Titan line uses the environmental friendly cooling gas R 134A. All coolers have a strong metal/plastic housing with a timeless design, so that the cooler do not look out of place in a living room besides the aquarium.
The Nitratreductor is an anaerobic biological filter for the removal of nitrate from marine and freshwater aquariums. Its characteristics are the big volume of 10 Litres Gallons) , the internal circulation and the low flow rate of 1 - 4 l/hr ( 0,25 - 1 gph). Under these conditions, special bacteria metabolize nitrate in the absence of oxygen. As energy, they need organic food, that is added as Denimar tablets and Deniballs. A control of the process is possible using a redox potential controller ( ORP controller). A connection port for the probe is included. The Nitratereductor is a closed system, that can be used integrated in filtration systems, but also stand alone under the aquarium. The water inlet is realized via a bypass from a circulation pump or a canister filter.

The Biostar Flotor is a combination of a powerful motor driven
protein skimmer with the Biorotor biological filter. It is designed for
salt water aquariums up to 250 l (c. 65 gal). It is the smallest
commercially manufactured complete filter system for salt water aquariums.
The competitively priced Biostar Flotor allows nearly every tank
within its capacity to be transformed into a marine aquarium. It is an
ideal filter system for beginners in the marine hobby.
With the Biostar Flotor the new trend in marine aquaria, the
Microreef and Nanoreef aquariums can be successfully achieved. The
skimming capacity of the system is large enough for dense stocking levels,
even with fast growing SPS corals.
The Biostar Flotor is also ideal for specialist aquaria - for sea
horses, crustacea or other invertebrates.
- protein skimmer with venturi pump (Ocean Runner PH 2000, 9 watts
with Needle Wheel)
- Biorotor system creating exceptional biological capacity with enhanced
oxygen uptake as the bacteria are alternately immersed and submersed.
- simple "hang on" mounting with 4 cm capacity holder
Dimensions (l x w x h):
8.5 x 25 x 23 cm - including foam cup 38 cm
(c. 3.4" x 10" x 9.2" - including foam cup c. 15.2")
The reactor introduces CO2 into the aquarium. Secured to the inside
of the glass, its advanced design offers a very high CO2 diffusion rate
and automatically removes any unwanted gases. The reactor is
designed for aquaria up to 500 litres (c. 125 gallons). reactor
extensions can be used to increase the capacity of the reactor for
larger aquariums.
Ø 50 mm (c. 2")
Length: 160 mm (c. 6.4")

The SP 3000 dosing pump is an economic peristaltic pump for pumping
small volumes of water. It is used with all bypass filters like the
Nitratreductor and the Calciumreactor, but also to top up
evaporated water combined with an aquaniveau and the
Kalkwasserreactor. A further application is the automatic dosing of
fertilisers and minerals. In freshwater aquariums, the iron fertiliser
ferreal can be added daily. In coral reef aquariums, the addition of
calcium and trace elements (products of the Reef Life series) can
be automated using the SP 3000.
The pump is supplied a long life Santoprene, hose.
technical data: SP 3000
capacity, fixed: 3 l/h (c. 0.8 gph)
max head (pressure): (10 m, c. 30 ft) 1 bar, c. 14.5 psi
Motor: Synchronous 20 rpm
power consumption: 4.5 watts
pump hose: Santoprene

The aquasunlight future aquarium lighting system now sets a new
benchmark for the design of aquarium lighting systems. The surrounding
aluminum profile blends the shape of the luminaire so it appears to float
above the aquarium. The design is clear and modern, but discreet in a way
that fits all aquarium styles. The technology is uncompromising: the
finest control gear, purpose designed lamps and powder coated aluminum
extrusion construction. One cannot wish for more. The technical
specification of the classic and future models is identical:
Both luminaires are available with lamps for fresh or saltwater as twin
lamp models. Standard colours are black or white, custom colours from the
RAL range are also available.
Metal halide lamps:
The salt water version of the luminaires are equipped with aqualine
10000 13000°K lamps, the freshwater version with the aqualine 5000
daylight lamp. The units are fitted with a patented lamp holder giving
positional adjustment from the outside.
Fluorescent tubes:
The saltwater version is supplied with blue fluorescent tubes, the
freshwater version with Gro-Lux tubes (2 x 30 watts)
Moonlight:
Long life 15 watt blue lamp. It creates a dim light enabling observation
of the aquarium during the night, and enables fish to orientate themselves
in the dark aquarium and prevents light shock to sensitive animals.
Control:
The basic equipment of the aquasunlight does not include any
control device. The 3 output channels can be controlled with standard
timers. As an option, the luminaires can be supplied with a Light
Computer (aquasunlight classic and future plus). With
this computer, the two main channels (metal halide and fluorescent lamps)
and the moonlight can be precisely controlled: the moonlight intensity
varies according to the diurnal cycle of the moon - a perfect simulation.
Reflectors:
The units are equipped with high quality, wide beam reflectors. The whole
underside of the unit is covered with reflector plates, ensuring a
sparkling lighting effect in the aquarium
Dimensions: 140 x 60 x 8 cm (c. 64" x 24" x 3.2")

aqua+KH tablets increase the alkalinity reserve (Carbonate
Hardness) and stabilize the pH in fresh water aquaria. By correctly
adjusting the Carbonate Hardness in planted aquaria, harmful fluctuations
of pH are avoided. If aqua+KH is used in Tanganyika and Malawi
aquaria, the pH and Carbonate Hardness values can be easily and accurately
increased. In conjunction with aqua+GH, reverse osmosis water or
excessively soft aquarium water can be prepared to standards suitable for
all freshwater aquarium fish and plants.
200 Tablets for 4000 °KH x litre (1000 °KH x gallons) or 1400 mmol
alkalinity

pointex effectively and reliably treats Oodinium and Cryptocaryon
parasites in salt water aquaria. The active substances decompose naturally
in the aquarium after 20 days and a water change after completing the
treatment is not necessary. pointex is not poisonous to fish but is
harmful to all types of invertebrates, and can only be used in fish only
systems or quarantine aquaria.
100 ml for 500 litres (c. 3.3oz for 125 gallons)
500 ml for 2,500 litres (c. 17oz for 625 gallons)
5 litres for 25,000 litres (c. 1.3 gal for 6,250 gallons)

life A comprises decapsulated artemia cysts, which can be hatched
in the same way as encapsulated cysts. The hatched nauplii are shell-free,
and in consequence there are no waste shells to remove. This shell waste,
if ingested, can cause serious problems for juvenile fish and they may die
due to constipation. Because life A is de-capsulated, it is an
excellent food for raising seahorses.
100 ml (c. 3.3oz) about 4 million eggs
250 ml (c. 8.45 oz) about 20 million eggs

Contains strontium ions in a
form, that can easily be assimilated by all invertebrates. Strontium is
essential for the exoskeletons of hard corals and reef mussels. Its use
prevents the retardation in the development of hard corals caused by
strontium deficiency. 250 ml (8.4oz) REEF LIFE STRONTUM can treat a 400l
(100-Gallon) aquarium for up to 3 months

terrapur is a cone-shaped concentrated fertilizer for aquatic plants. It is specifically designed for re-fertilization. Due to the high concentration of nutrients, a positive result is visible within days. terrapur does not cause any water turbidity and maintains its form even after the nutrients have been released. Besides containing iron and magnanese, terrapur also contains trace elements including potassium and magnesium all bonded to a basic structure made from a natural zeolite. Terrapur fertilizing cones: available singly from your retailer or in a box of 20

The Turboflotor 750 is a compact, motor driven internal protein skimmer. A large volume machanical pre-filter is attached to the pump. The 10-watt venturi pump, with needle wheel, automatically draws in air and mixes it with the air aquarium water. The resulting air/water mixture is forced into the reaction cylinder (75 mm, 3 inch diameter). An expansion cone with a post-filter is attached the lower end of the cylinder. The foam cup inner tube is conical shaped to improve the ejection of foam. The strong holding system allows safe fastening of, and adjustments to, the skimmer whilst it is mounted in the aquarium.
Diameter: 75 mm, c. 3"
Length: 55 cm, c. 22"
Total width: 15 cm, c. 6"

The Midiflotor is a
small but powerful air-driven internal protein skimmer. Like the
Miniflotor, the Midiflotor features the double reaction
cylinder. Within the inner cylinder, air bubbles rise and carry large
quantities of water. This water falls into the external cylinder and
carries the air bubbles downward into the expansion cone. Here the bubbles
turn, and rise upward into the foam cup, against the strong
counter-current. The Midiflotors foam cup inner tube is conical,
which ensures quick extrusion into the cup, and helps to dry the foam. The
strong holding system allows movement of the skimmer vertically to adjust
the foam production zone. A lime wood air stone producing very fine air
bubbles is also included. For the air supply, we recommend the membrane
air pump Mistral 200.
Diameter: 75 mm, c. 3"
Length: 40 cm, c. 21"
Total width: 15 cm, c. 6"
![]()
The Miniflotor is a
small but powerful air-driven internal protein skimmer. Its principal
feature is the double reaction cylinder system: within the inner cylinder
air bubbles rise and carry large quantities of water upward. This water
then falls into the outer cylinder and carries the air bubbles downward to
the expansion cone, which stops the air bubbles. They therefore rise up,
against the strong counter-current, and carry waste products to the foam
cup. This procedure ensures a long contact time for the bubbles, making
this an effective, but compact skimmer. The Miniflotor includes a
strong holding plate, allowing vertical movement of the skimmer to
regulate the foam production zone. A lime wood air stone producing very
fine air bubbles is also included. For the air supply, we recommend the
membrane air pump Mistral 200. Now, with new foam cup design.
Diameter: 50 mm, c. 2"
Length: 45 cm, c. 18"
Total width: 15 cm, c. 6"

The Temperature Computer is a precise multi-functional, temperature controller. It includes a digital temperature sensor. The mode of operation can be set using the function keys, either as a heater or cooler controller. In the "heating" mode, the actual temperature is adjusted to the set value using a pulse-packet control with an accuracy of 0.1°C. In the "cooler" mode, the accuracy is 0,5°. The maximum useable wattage for heaters is 1000 watt and for coolers 600 watt.
LF Controller
Conductivity monitor and controller
The salt content of water can be determined using the electrical conductivity. A special feature of the Conductivity monitor and controller LF 2001 C is the broad measuring and control range, that is divided into 2 ranges: From 0 – 2.000 µS, the unit is used for monitoring desalinated water and freshwater, in the range 0 – 200 mS for brackish and salt water. Thus the unit can be used for the control of reverse osmosis units and breeding tanks with soft water and for the control of the salt content in marine aquaria. The unit is supplied with a directly connected, sea water resistant graphite electrode.
The phosphatefilter is
a compact chemical filtration chamber for aquarium use. It can be
installed in line with any standard canister filter, or via a separate
pump. The phosphate filter contains 1 litre of antiphos. This
reduces the level of phosphate and thereby curtails the growth of
filamentous algae. Depending on the phosphate level, one filling of
antiphos may be sufficient for an aquarium up to 400 litres (c. 100
gallons) for between four and twelve weeks. The phosphatefilter can
be used for fresh and salt water aquaria.
Diameter 80 mm (c. 3.2")
Length 35.5 cm (c. 14")
Hose connection 16 mm (c. 2/3")

4- stage inside filter system for seawater aquaria up to a volume of 500 Litre ( 125 Gallons).
The filter sytem Marin 500 is designed for use inside of the aquarium. It consists of a filter tank with the dimensions 48 x 18,5 x 48 cm ( 19" x 7,5" x 19"). Via a surface overflow and prefilter sponge, the water comes to the protein skimmer ( Midiflotor). From here, the water is pumped to a trickle filter with Bactoballs for biological filtration and to a Nitratereductor.. A second pump with a capacity of 1.000 Liter/Hr ( 250 gph)pumps the water back to the aquarium. With the Marin 500, existing aquaria can be transferred into powerful seawater tanks without any plumbing or interruptions into the glass.

purification
of tap water from 30 – 150 liter /day
The Standard line of reverse osmosis
units are compact and powerful. They fulfill the highest demands of
water quality. The sediment filter retains all particles larger than 5 µm.
The carbon filter protects the membrane by removing the chlorine. The
module consists of a membrane, membrane housing, and a flushing vale. The
membrane is the heart of the unit and is responsible for the quality of
the water. Our units work exclusively with newest generation of TFC (Poyamis/Polysulfone)
membranes. These units work with a recovery ratio of approximately 2.5 – 3
concentrate: 1 permeate. And have an rejection rate of approximately 95
–98%.
unit capacity per day at 15°C and 4 bar
Standard 30 30 - 40 Liter (8 - 10 Gallons)
Aqua 30
Standard 90 75 - 90 Liter (20 - 24 Gallons)
Aqua 90
Standard 150 120 - 150 Liter (32 - 40 Gallons)
Aqua150

The carbolitreactor is a compact chemical filtration chamber for
aquarium use. It can be installed in line with any standard canister
filter or used with a separate pump. The carbolitreactor contains
one litre of pH neutral carbolit. The carbolitreactor can be used
for fresh and salt water aquaria. One filling lasts, depending on the load
and use, for between 10 days (for removal of medications) to up to 12
months (for long term use as biological filter) in a 400 litre (c. 100
gallon) aquarium.
Diameter 80 mm (c.3.2")
Length 35.5 cm (c. 14")
Hose connection 16 mm (c. 2/3")
CO2 complete contains all the equipment required to provide CO2
fertilization in the aquarium. The set contains the following:
- station 350 g (c. 0.77 lb.) CO2 cylinder
- regular CO2 pressure regulator
- counter CO2 bubble counter
- reactor to allow the CO2 gas to diffuse into the water
efficiently
- CO2 cylinder holder, cleaning brush and connection tube.

m-ventil
Aqua light 400
hese aquarium luminaires are supplied with metal halide lamps. Matched to
the requirements of the animals and plants in the aquarium, they
realistically simulate natural lighting conditions. The combination
of the aquastarlight, aquabluelight and
aquamoonlight lighting systems provide natural illumination
"around the clock". The housing is made of powder coated corrosion
resistant aluminum, with special reflectors and safety glass.
Standard finishes are black, white or silver, although any RAL
colour is also available. The seawater lighting systems are supplied
with the aqualine 10000 lamps whilst the freshwater systems
contain the daylight aqualine 5000 lamps. As an option, the
lamps can be supplied with aqualine 20000 bulbs.
The supplement aquabluelight is manufactured with an
identical housing to the aquastarlight. It is supplied with
Osram Dulux 24 watt compact fluorescent lamp(s).
In the twin and triple lamp versions of both the aquastarlight
and aquabluelight, moonlight fittings can be integrated. A
special 15 watt incandescent bulb is used which may be dimmed, and
with the aid of the Light Computer, a natural lunar cycle can
be simulated.
The aquastarlight fixtures are supplied complete with aquafit
steel suspension cables. As an option, they may be wall mounted
using the aquawall bracket, which will support one aquastarlight
and an aquabluelight if required.
antigreen will control blue-green and filamentous green algae in
fresh water aquaria. When used in accordance with the instructions, plants
and fish will not be harmed, and higher plant growth will even be
stimulated. During treatment, the filter may remain in operation, and the
micro-fauna will remain intact. No toxic residues are left in the water
after its decomposition.
100 ml for 160 litres (c. 3.3 oz for 40 gallons)
500 ml for 800 litres (c. 17 oz for 200 gallons)
5 litre for 8,000 litres (c. 1.3 gal for 2,000 gallons)

aqualife water conditioner prepares tap water for aquarium use. It
conditions the water so it becomes suitable for even the most delicate
fish and plants. Special protective colloids protect the mucous membrane
and the gastro-intestinal tract of the fish. aqualife converts
heavy metals and chlorine into harmless compounds and should be used at
every water change, and after the termination of disease treatments.
100 ml for 600 litres (c. 3.3 oz for 150 gallons)
250 ml for 1,500 litres (c. 8.4 oz for 375 gallons)
500 ml for 3,000 litres (c. 17 oz for 750 gallons)
5 litres for 30,000 litres (c. 1.3 gal for 7,500 gallons)

exodin is an effective and reliable treatment against Oodinium.
exodin is not harmful to invertebrates or marine algae and the
disinfecting effect of exodin helps to prevent the fish from
contracting secondary infections. During treatment, no turbidity or water
colouring occurs.
100 ml for 250 litres (c. 3.3 oz for 65 gallons)
500 ml for 1,250 litres (c. 17 oz for 325 gallons)
5 litres for 12,500 litres (c. 1.3 gal for 3,250 gallons)

food U is a high energy food for nurturing the larval fish of many
species. It is a eminently suited for feeding in the first few days of
life until the larvae are able to eat larger foods, such as artemia.
food U contains all the nutrients required for this initial growth
stage. It is especially suited to use as a supplement for rearing discus
fish.
100 ml (c. 3.3oz)
250 ml (c. 8.45 oz)
Reef Life
Iodine
Three component iodine
additive for reef aquaria.
Iodine is an essential trace element for corals, higher algae and especially for crustacea. Iodine quickly oxidizes this makes it unstable. Therefore REEF LIFE IODINE was developed as a three component iodide additive, it releases its components sequentially for continuo assimilation by animals and plants: iodide ions and elementary iodine are available immediately. Even after several days the third component provides long term stable organic iodine. 250 ml (8.4 oz) of REEF LIFE IODINE treat a 400-l (100-gal) aquarium for 3 months.

volcanit is a pH-neutral aquarium gravel of volcanic origin. The
fine pore structure of the gravel encourages bacterial activity that
enhances the biological release of nutrients from within the gravel. The
results are superb plant growth. volcanit is mixed with 10%
ferrolit, a natural long term iron fertilizer derived from Laterite.
The resultant black and red colour enhances the beauty of the aquarium
plants and the hues of the fish.
volcanit plastic bag 7 kg (c. 15 lbs.)
Reef 500
Modular filter system for reef aquaria up to 500 l ( 250 Gallons) to be mounted in the cabinet.
The filtersystem reef 500 is a compact 3 stage unit for use in the cabinet under the aquarium. The system is a modular construction and can be enlarged or completed on demand. The system consists of a pre-filtration module for mechanical filtration, filled with sponge, a Turboflotor 1.000 protein skimmer with venturi pump and needle wheel, and a post switched trickle filter filled with Bactoballs for biological filtration. Optional is a glas fillter sump. This sump is designed to take in addition a Calcium Reactor and a Nitratereductor.

Reef 1000
6- stage water treatment system for reef aquaria up to a volume of 1.000 Liter (250 Gallons)
The filtration system reef 1.000 is designed for the use in a cabinet. It contains in a compact space all elements, that are necessary for the successful maintenance of a modern reef aquarium - without any compromises. The focal point of the water treatment is protein skimming. The reef 1.000 consists of a filter sump, 90 x 36 x 35 cm ( 36 x 14,5 x 14 inches), with mechanical filter chamber with sponge. From here, the water flows via the two venturi pumps into both Turboflotor 1.000, with their post switched trickle filters. The other components are the Nitratereductor, the Calcium Reactor and the Niveaustsa, a storage tank for topping up the tank.

The filter system Reef 2000
is a ready to use filter system for salt water aquariums up to a volume of
1500 litres. The components are:
- Filter tank with bio filter, approx. 100 l volume
- Protein skimmer Turboflotor 5000 Shorty compact with venturi pump Ocean Runner 3500 with Needle Wheel
- Calcium reactor 1000, with dosing pump SP 3000
- Nitratereductor 1000, with dosing pump SP 3000
- Refill Tank with electronic level controller aquaniveau and
refill pump
- 2 pieces circulation pumps Ocean Runner 3500
Dimensions overall 155 x 45 x 65 cm,
c. 62" x 18" x 26" ( L x W x H)
Water connenctions: inlet Union D 50,
outlet to pump: 2 x D 32

With the aqualine C,
a new dimension has arrived in aquarium measurement and control. It
provides a complete solution for the control of all major aquarium
parameters and is operated by microprocessor.
- Large LCD colour display (Graphics Display) in an elegant
aluminum frame.
- Base Box, with connections for the probes
- Power Box with electrical connections for four separate functions
- Remote Control ( to select the menus) Also included in the basic
set is one each of pH, Redox, temperature and conductivity probes, plus
two float switches.
Channels:
pH / Redox (ORP): 4 Channels for pH and Redox probes, which can be
programmed as needed ( 2 x pH and 2 x Redox).
Temperature: used for heating and cooling. Can be programmed to
lower the temperature during the night.
Conductivity: used to measure fresh or salt water up to 70 mS
Level: 4 channels for float switches. They can be programmed for 2
circuits. A relationship between conductivity and water level can be set.
Additional functions:
Timer: 4 timer channels can be programmed as time switches or as
interval controllers.
Statistics: The data measured over the previous three weeks is
saved and can be displayed graphically on the screen enabling the
monitoring of the daily fluctuations of the measured aquarium data.
Options: Additional Power Boxes can be added (to a total of 8
units) increasing the total number of available output channels to 32.

SK-line
The Sk line of flow through coolers has been designed for cooling aquaria form 200 - 7.000l (50 - 1750) volume.Highest value was put on security and on environmental safeness. The units are absolutely sea water proofed.. Water contacts only plastic material, no metal is used in the heat exchanger. All units are supplied with a digital temperature controller.
Marin 1000
compact modular filter system for marine aquaria up to 1.000 Litre ( 250 Gallons) volume.
The filtration system Marin 1.000 is designed for use in the cabinet under the aquarium. It consists of a closed filter sump ( 54 x 36 x xx cm 22 x 14 x xx inch) to take up the filter modules. The modules can easiely be reached through 2 sliding doors for maintenance. For installation, the top lid of the filter can also be removed. The water coming from the aquarium is treated first by 3 trickle filter modules, filled with Bactoballs for biological filtration. The other components are a Turboflotor 1.000 protein skimmer and a Nitratereductor.

Calcwater reactor
For the production of
Calcwater, for salt water aquaria up to 2.000 L volume.
The Kalkwasserreactor is a sealed
unit designed to supply reef aquaria with Calcium by enriching the fresh
water top up supply. It uses the Kalkwasser-method and is filled with
Calcium hydroxide, which is intermittently agitated by a pump. It is
possible to automate the system by combining an automatic level controller
such as the ab aquaniveau single with the AquaMedic
Kalkwasserreactor. The reactor is engineered to take a pH electrode to
control the quality of the kalkwasser. An additional advantage of this
method is, that phosphate is removed from the top up and the aquarium
water.
Dimensions:
17 x 17 x 54 cm ( L x B x H), c. 7" x 7" x 22" ( L x W x H)
Calcium
Reactor
for the supply of marine
aquariums with dissolved calcium
The Calcium reactor is a closed system designed for universal use. It can be used as a bypass system, independent from the water level in the aquarium or the filter sump.. Its characteristics are the big volume ( app 10 kg Hydrocarbonate) and the integrated circulation pump. By addition of CO2 , the pH value in the Calcium reactor drops and Hydrocarbonate is dissolved. In spite of the slow flow rate of 1 -4 l/hr ( 0,25 - 1 gph) big amounts of dissolved Calcium get into the aquarium and can be taken up by the animals. The Calciumreactor is supplied with a port for the CO2 probe ( Standard thread PG 13,5).
CO2 Cylinder and CO2 Cylinder 2kg The station is a steel CO2 storage bottle with an external shut off valve. It is available in three sizes: 350 g, 500 g and 2 kg (c. 0.77 lb. 1.1 lb. and 4.4 lb.) All the cylinders are supplied with a safety cage and the 2 kg size has a stand base.

Moonlight
The aqualine 10000 lamp has a colour temperature of 13000º Kelvin
and a high percentage of the light output is at the blue end of the
spectrum. aqualine 10000 was the first metal halide lamp to
simulate the light conditions of a coral reef and the new lamp with its
improved getter gives long term colour stability and results is an even
more realistic looking aquarium. The corals show their natural colours,
and the lighting encourages excellent growth. aqualine 10000 helps
to transform your aquarium into a perfect reef tank.
70 Watt double ended 250 Watt single ended E 40
150 Watt double ended 400 Watt single ended E 40
250 Watt double ended 1000 Watt single ended E 40
175 Watt single ended E 39

antired will successfully eliminate red slime algae in salt water
aquaria. antired is safe with invertebrates, is not harmful to
nitrifying bacteria, and promotes the growth of higher algae. The protein
skimmer must be running and carbon filtration discontinued during the
treatment. Dead and dying algae must be removed mechanically.
100 ml for 400 litres (c. 3.3 oz for 100 gallons)
500 ml for 2,000 litres (c. 17 oz for 500 gallons)
5 litres for 20,000 litres (c. 1.3 gal for 5,000 gallons)

aqua+GH increases the Total Hardness in fresh water aquaria. The
tablets contain a carefully formulated balance of minerals including
calcium and magnesium. In conjunction with aqua+KH, reverse osmosis
water or excessively soft aquarium water can be prepared to standards
suitable for all freshwater aquarium fish and plants.
200 tablets for 5000 °GH x litre
(c. 1250 °GH x gallons)
biobacter is a compound containing freeze-dried living bacteria. It
is used to start new biological filters, re-vitalise filters after using
medication, and to improve nitrification in existing aquaria. biobacter
comprises a glass vial of bacteria and a tube of nutrient tablets for the
bacteria
1 carton for 250 litres (c. 60 gallons)

ferreal is a complex compound containing iron and the essential
trace elements such as manganese, molybdenum, boron, zinc and cobalt that
are essential to aquatic plants. ferreal is rapidly assimilated by
the plants. Used regularly it promotes growth, discourages yellowing of
the leaves and enhances the brilliance of the plant's colours.
100 ml for 600 litres (c. 3.3 oz for 150 gallons)
250 ml for 1,500 litres (c. 8.4 oz for 375 gallons)
500 ml for 3,000 litres (c. 17 oz for 750 gallons)
5 litres for 30,000 litres (c. 1.3 gal for 7,500 gallons)

plancto is a high quality concentrated food for the safe nutrition
and cultivation of plankton and marine invertebrates. Its unique
composition and its particle size of 25 - 200 µm makes it especially
suitable for plankton feeders. It is also an excellent single food source
for rearing artemia. Composition: ground natural plankton, algae, yeast
and proteins.
100 ml (c. 3.3 oz)
250 ml (c. 8.45 oz)
5 litres (c. 1.3 gallons)
Sea Salt
Synthetic sea salt for aquaria
Aqua Medic Meersalz is a high quality aquarium
salt, fulfilling all demands of a modern salt mixture. Its composition of
pure substances containing pH buffer and all the essential trace elements
needed for salt-water aquarium. It quickly dissolves without any residues
and can be used shortly thereafter. Its quality has been proven by
numerous public aquaria, wholesalers of salt-water fish, in coral riff
aquaria, and even in fish tanks. Aqua Medic Meersalz is delivered in 4 and
20-kg plastic bags.